Corporate

Hufcor is a privately held U.S.A. corporation and is the world's leading manufacturer of operable and accordion partitions. Hufcor combines innovative engineering and design concepts to offer our customers the broadest range, most technologically advanced, high quality products available.

to top

Worldwide Availability

Hufcor's headquarters are located in Janesville, Wisconsin, USA. To support our global availability, Hufcor partitions are also manufactured in Australia, Brazil, Canada, China, Finland, France, Germany, Japan, Malaysia, Mexico, Russia, South Africa, Spain, and the United Arab Emirates. Hufcor products are sold, installed, and serviced by authorized distributors located throughout the world. If you are an architect working in New York and building a project in another area of the world, our extensive global reach allows us to provide assistance wherever you need it.

to top

Mission Statement

HUFCOR will continue to provide worldwide industry leadership through an obsession with customer satisfaction and business integrity.

We are dedicated to provide quality and innovation; and to providing our Team Members challenging, rewarding growth opportunities with respect for individual dignity.

We recognize our community responsibility and the need for a fair profit.

We are committed to continually improve customer satisfaction based on Quality, Value and Service.

to top

Hufcor's Values

These shared values will give us the environment to allow us to service our customer beyond his or her expectations. It will create an atmosphere for change which will allow us to be innovative in our product offering, while at the same time reduce costs, change processes, and reduce cycle times.

FAIRNESS - The balance that provides understanding and empathy.

OPENNESS - The ability to listen to other opinions and ideas. Innovative and expansive thinking can only take place if there is openness. Work first to understand then to be understood.

RESPECT - To treat each other as we would want to be treated.

ENTHUSIASM - Energizes the team to overcome obstacles. Think win-win.

SENSE OF HUMOR - The balance beam of sanity - never lose it - always use it.

TRUST - This is the greatest, most important value. Trust is truth, which is honesty. It touches all other values.

ATTITUDE - A positive attitude radiates to everyone around you as much as a bad attitude negatively affects the whole department. Be proactive. A positive attitude improves your work environment and personal mental and physical health.

RESPONSIBILITY - The second most important value. We are responsible for our actions and how they affect others.

to top

Driving Directions

From Madison, WI:

Approximately 45 minutes from Dane County Airport.

Take I-90 East (heading south). Exit I-90 at Hwy 26 south, at Janesville. Turn right onto Hwy 14 at the 2nd stoplight (intersection of Hwy 26 and 14, Perkins Restaurant is on the right, K-Mart on the left). From Hwy 14, turn left at Kennedy Road (before the railroad tracks). Hufcor is located on the right side of Kennedy Road approximately one mile from the turn. We're easy to spot– our large building is blue, green and yellow.

You may park in the visitors lot entered at the corner of Kennedy Road and Norwood Rd, (just beyond our building).

From Milwaukee:

Approximately 1 hour, 15 minutes from Mitchell Airport (Easiest)

As you leave Mitchell Airport, turn onto I-94 west towards Milwaukee. Immediately move to the left hand lane. Turn onto I-894 west. Stay on I-894 west for approximately 5 miles. Move to the left hand lane and exit I-43 south. Watch for the sign to Beloit. CAUTION: there is also a Beloit Road nearby. Don't take Beloit Road – you want I-43 towards the city of Beloit.

Exit I-43 south at the I-90 west exit (heading north) at Beloit. (approx 60 miles). Leave I-90 west at Exit 171B, Hwy 14 West. Just before exiting I-90, you will see the Holiday Inn Express and Conference Center on the right.

Turn left onto Hwy 14, continue heading west past K-Mart and Perkins. Kennedy Road is just before the railroad tracks. Turn left onto Kennedy Road. Hufcor is located on the right side of Kennedy Road approximately one mile from the turn. We're easy to spot– our large building is blue, green and yellow.

You may park in the visitors lot entered at the corner of Kennedy Road and Norwood Rd, (just beyond our building).

Alternate route from Milwaukee Airport:

(Shorter)

As you leave Mitchell Airport, turn onto I-94 west towards Milwaukee. Immediately move to the left hand lane. Turn onto I-894 west. Stay on I-894 west for approximately 5 miles. Move to the left hand lane and exit I-43 south. Watch for the sign to Beloit. CAUTION: there is also a Beloit Road nearby. Don't take Beloit Road – you want I-43 towards the city of Beloit.

Stay on I-43 west to the Darien Hwy 14 Exit. Turn right on Hwy 14 and continue to the stop sign at the intersection of Hwys 11 and 14. There is a service station on the corner. You will continue on Hwy 14 west past the Hwy 11, I-90 and the Hwy 26 intersections to Kennedy Rd. approximately 15 miles. Kennedy Rd. is just before the railroad tracks. Turn left onto Kennedy Road. Hufcor is located on the right side of Kennedy Road approximately one mile from the turn. We're easy to spot– our large building is blue, green and yellow.

You may park in the visitors lot entered at the corner of Kennedy Road and Norwood Rd, (just beyond our building).

Route from North Milwaukee:

Approximately 1 hour, 15 minutes

Take I-94 west to Johnson Creek Exit. Exit at Hwy 26 south to Janesville. When approaching Janesville, turn right onto Hwy 14 at the intersection of Hwy 26 and 14. (Perkins Restaurant is on the right, K-Mart on the left.) Turn left onto Kennedy Road just before railroad tracks. Hufcor is located on the right side of Kennedy Road approximately one mile from the turn. We're easy to spot– our large building is blue, green and yellow.

You may park in the visitors lot entered at the corner of Kennedy Road and Norwood Rd, (just beyond our building).

to top