Frameless Glasswall Partitions - Model GL
Masterformat Section 10 22 26 & 08 41 00
Product Information
Technical Information
Finishes
GL Frameless Track Systems
The track and carrier suspension is an essential part of glass partitions. All Hufcor suspension systems are designed to provide adequate support and easy operation. The track system allows the carriers to easily move in the track without binding or excessive noise. Each system has been thoroughly tested to the equivalent of 10 years of use.
Our heavy duty aluminum track is clear anodized to prevent rub marks and discoloration that can occur with mill finish aluminum. Each piece of track includes alignment pins to help perfectly align it with the adjacent piece of track. This is important for easy movement and to prevent damage to the carrier wheels.
The track provides integral support for adjoining ceiling, soffit, or plenum sound barrier. The track may be direct attached to the header or suspended from threaded steel hanger rods.
Tracks for GL1 Single Panel (individual or omni-directional) Configurations
We also offer an aluminum curve and divert system for ease of stacking the panels in small pockets. The curve and divert track system cannot be direct attached to the header. It must be suspended from hanger rods.
Type 26 Track
Type 26 Track is used
for panels weighing
up to 500 lbs. each.
Type 36 Track
Type 36 Track is used
for panels weighing
over 500 lbs. each.
Shown with optional
suspension bracket
for 5-1/4” hanger rod
spacing. Bracket is also
an option for Type 26
track.
Tracks for GL2 Paired Panel Configurations (For wall-to-wall division)
Type 38 Track
Type 38 Track is used
for panels weighing up
to 400 lbs. each.
