Frameless Glasswall Partitions - Model GL

Harvest the natural light with glasswall partitions.

About Frameless Glasswall - Series GL

The drama and beauty of glass enhances any space. Hufcor’s glass panels combine the beauty of glass with the functionality of an operable partition. These panels are ideal for areas where a physical, but not a visual barrier is needed.

They allow the light to come in and provide the flexibility to reconfigure space.

Frameless glasswall panels are made from a sheet of glass attached to top and bottom aluminum horizontal rails. The panels are shipped fully assembled.

The most popular glass ordered for frameless glass panels is clear or satiny translucent (frosted). However, custom glass, acrylic inserts, and more can be used if they will fit into the horizontal rails. The glass may also be etched or decals added.

Mechanical fasteners secure the glass to the rails thru holes in the glass which are covered by the horizontal rails.

The glass edges are polished for a smooth finish. There is a 1/4” - 1/2” [9.5-12.7mm] gap between panels to prevent the edges from touching. The size of the gap varies due to glass tolerances.

Frameless glass panels are suspended from an overhead track and carrier system -- no floor tracks or guides are needed; however, the panels require floor pins and receptacles in the floor to keep them secure in the opening.

Configuration

Heights to 10'5" [3175mm] are standard. However, heights over 10'5" [3175mm] may be available under certain conditions. Please contact your Hufcor distributor for assistance.

Frameless glasswalls are available as paired panels(two panels hinged together) or as single panels (also known as omni-directional or individual).

Single Panels - Model GL1

Single panels are suspended from an overhead track that allows the panels to be setup in angles, navigate through intersections, be moved to alternate locations or be stored in a remote area. See setup video GL1.

Paired Panels - Model GL2

Paired panels are used to close an opening from wall-to-wall. The panels may be stored at one or both ends of the opening. See setup video GL2.

to top