Operable Partitions

Aluminum Track Systems
Steel Track Systems
Unispan

Hufcor Operable Partition Track Systems

A quality track system assures your partitions will move easily for years to come and enhance fast panel set-up and takedown. All Hufcor tracks are rigorously tested to last a minimum of 100 miles (approximately ten years) of use. Job requirements vary, which is why Hufcor offers a selection of tracks to meet your needs. Our patented designs are the most imitated in the industry. See Product Brief for more track types and information.

ALUMINUM TRACK SYSTEMS

Our aluminum tracks are of clear anodized extruded architectural-grade 6063-T6 alloy.

STEEL TRACK SYSTEM

Hufcor Steel Track is used when the partition height or weight limit exceeds that recommended for the aluminum system. The tracks have been load tested a minimum of 100 miles [161] (approximately 10 years of use).

Type 11 Track Available On Pairs, Single Panels and Electric Continuously Hinged models to 3000 lbs. per panel

For Pairs and Electric Trains weighing up to 1500 lbs. [680] and Omnis weighing up to 3000 lbs. [1364] per panel. The track is made of 1/4" [6] slotted structural steel tubing, painted black. The track trim is clear anodized aluminum. All intersections are factory assembled and welded. Curves, diverters or switches are available. One carrier is provided per panel for pairs and trains; two carriers per panel for omnis. Each carrier has four steel wheels with precision-ground radial bearings. Bearings are inserted into a steel tire. The steel tire rim fully captures the bearing.

Carriers may be programmed for self-directing and sorting. Minimum dimension from the ceiling to the structure is 12" [305]; the minimum becomes 16" [406] when used with electric partitions.

to top

UNISPAN

Unispan is a support system for accordion or operable partitions. It is used in rooms lacking the overhead support to carry the weight required for partitions. The system consists of a horizontal truss and two vertical posts that support a partition independent of the building. The posts transfer the partition weight to the floor and the weight is dispersed with floor pads installed under the posts. The system is attached to the building with bracing which is needed for lateral support only. See Unispan for more information.

to top